GNSS Performance with tilt compensation

|  specifications  |  brochure  |  user manual  |  pricing  |
|  why iGage?  |  faq  |  tools  | update |  static only  |  mss  |

updated 8 May 2023

iG9 receivers are available with and without IMU tilt-compensation.
Single heads, Base or Rover are priced the same.

It is common to combine an iG9 Rover kit (with IMU Tilt) and a iG9a Base kit (without IMU Tilt):
   iG9a Base + iG9 IMU Tilt Rover: $18,460

or to combine two iG9a kits (Base and Rover without IMU Tilt):
   iG9a Base = iG9a Rover: $17,020

Any combination of iG9 (with IMU Tilt) and iG9a (without IMU Tilt) can be specified. Common kits are listed below.

Note: a FCC license is required to use the iG9 / iG9a as a UHF Base. We highly recommend using [ FIT ] to obtain a license if you do not already have an appropriate license.

0% Factory Financing is available (OAC) [ iGage 10-24 ]

Standard Kits

iGage Price

$19,900

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

$18,460

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

$17,020

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

$ 9,950

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

$ 8,510

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

$ 9,950

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

$ 8,510

0% Factory Financing
is available (OAC)
[ iGage 10-24 ]

A fully enabled iG9 measurement head

[B or R are identical]

UHF Antenna

5/8 Antenna with TNC Connector

[B+R]

Quad Battery Charger &
Wall Adapter

The charger will simultaneously charge 4 batteries.

The Power Adapter can be used for the battery
charger or as an external power source for iG9
base with the serial cable.

[R]

Lithium-Ion Batteries

High Capacity 3,400 mAH
7.4 V Lithium Ion Batteries

Two batteries included with each receiver.

[B+R]

External Heavy Duty Power Cable

2.5 Meters long, connects to the Serial connector
on the bottom of the receiver.

Provides extended power to an RTK base.

[ Brochure ]

[B]

SERIAL IO and Power Cable

Connects the GNSS head to a computer serial
port or an external UHF radio.

Can be used to provide external power to the head.

[R]

USB-Mini to USB-C OTG

Used to extend internal memory for huge occupation
storage and to update the receiver firmware with
a thumb drive.

[R]

Used to connect the receiver to a PC and download
occupations from the internal memory. With this cable,
the 27-gigabyte internal memory is accessible as
an external USB drive, just like a flash-disk.

[R]

30-cm Extension Pole

Raises the base iG9 above a tribrach high enough
to allow the UHF antenna to be connected to
the receiver when mounted on a tribrach.

[B]

Hold-a-Pole

We include a Hold-a-Pole with every base.

Can be used with a tripod and 2-meter pole to
hold the base at a fixed height and to calibrate
the bubble on the pole.

[B]

TNC Extension

Extend the base UHF radio antenna further above
the ground, greatly enhancing the radio range.

[B]

SIM Card

We include an unactivated GSM SIM card with
every iG9 rover. If you are using the iG9 as a
Network Rover you can activate your own cellular
data service or you we can activate the
included card. [ Annual Plan Pricing ]

[R]

Detailed, Step-by-Step
User Manual

We include a full-color, printed
iG9 / iG9a User Manual with every system.

You can download the current User Manual [ here ].

[R]

Field Ready Hard Case

Sealed rugged hard cases with custom foam
inserts with plenty of compartments to protect
your receivers and accessories.

[B & R]